PayFast PayFast PayFast PayFast

Hints & Tips

Q1 INTERCOM COMPATIBILITY WITH OTHER SCALA RIDER MODELS

The scala rider Q1 and Q3 are fully compatible for intercom communication.

When pairing the following models with a scala rider Q1, please make sure to them via their Channel A:

  • G9
  • G4
  • Q2 PRO
  • Schuberth SRC-System

Following the pairing process, both scala rider units should be turned OFF and ON again before using the intercom.

NOTE: When pairing with a Q1, only Rider-to-Passenger Intercom is available.

Q3 INTERCOM COMPATIBILITY WITH OTHER SCALA RIDER MODELS

The scala rider Q3 and Q1 are fully compatible for intercom communication.

When pairing a Q3 for intercom with the following scala rider models, please make sure to pair via Channel A:

  • G9
  • G4
  • Q2 PRO
  • Schuberth SRC-System

When pairing the above models with a scala rider Q3 – make sure to pair via channel A on both units.

Following the pairing process, both scala rider units should be turned OFF and ON again before using the intercom.

NOTE: In terms of range, intercom with other models is limited to the distance of the device with the shorter range. Therefore, connecting a Q3 unit with a G9 will enable intercom distances of maximum 3,200 ft / 1 km. Likewise when pairing with a Q1, only Rider-to-Passenger intercom is available.

G9 INTERCOM PAIRING WITH OTHER SCALA RIDER MODELS

GENERAL NOTES:

  • The scala rider G9 is compatible with ALL scala rider models. It is also compatible for use with Schuberth’s SRC-System. Make sure you have the user manuals of both units available.
  • Intercom range with a G9 is dependent upon the maximum range of the other scala rider model. When connected to a Q1, Solo, FM, TeamSet pro PRO or TeamSet Driver unit – only Rider-to-Passenger Intercom is available.
  • Before starting the intercom pairing process, first make sure both units are turned ON and in Standby mode (consult the User Manual of each unit).
  • Intercom is Full Duplex - all parties can speak and hear one another simultaneously, similar to phone conversations and unlike walkie-talkie communication.
  • Selecting a Channel that is already in use will replace the paired device on that Channel with the newly paired headset.
  • If the Pairing process is not completed within two minutes the units will return to Standby mode.

 

ENTERING G9 PAIRING MODE

1. On the G9, select a Channel (A or B) to pair the other unit on.

2.  Press the desired Channel button for at least 5 seconds until the Red/Blue LEDs begin rapidly alternating.

 

ENTERING PAIRING MODE ON THE SECOND UNIT:

 

G4:

Press the desired Channel button (A or B) for at least 5 seconds until the Red/Blue LEDs begin rapidly alternating.

Once both units stop flashing they will display a solid Red/Blue LED (according Channel) for 2 seconds to confirm that they are paired and ready to make / receive intercom calls.

 

Q1/Q3:

  1. Press the “IC” button for 5 seconds to enter pairing mode.
  2. On the Q3, to select Channels B or C, press “IC".

 

Q2/Q2 PRO:

On the Q2/Q2 PRO, press the CTRL Button until the Red/Blue lights begin rapidly alternating.

Once both units stop flashing they will display a solid Red/Blue LED (according Channel) for 2 seconds to confirm that they are paired and ready to make / receive intercom calls.

 

Solo, FM, TeamSet pro or TeamSet Driver unit:

Press and hold the CTRL Button until the Red/Blue lights begin rapidly alternating.

NOTE: When using a scala rider Solo, FM, TeamSet pro or a TeamSet Driver unit to serve as the Passenger unit, Voice Connect Intercom can only be initiated from the G9. However, you can always initiate the Intercom manually from the other scala rider unit by pressing the button.

 

THREE WAY INTERCOM WITH OTHER SCALA RIDER MODELS

1. Pair G9 to 1st Unit via Channel A button: Choose Procedure A, B C or D above depending on the model you are pairing.

2. Pair G9 to 2nd Unit via Channel B button: Choose Procedure A, B C or D above depending on the model you are pairing.

 

MAKING INTERCOM CALLS FROM OTHER SCALA RIDER MODELS TO A G9:

G4: Use VOX or tap Channel A or B button

To end the call, tap Channel button again or remain silent

Q3/Q1: Use VOX or tap “IC”

To end the call, tap “IC” again or remain silent

Q2 PRO: Tap the MC button once.

To end the call, tap MC button again.

Q2:Tap the MC button twice. Wait 3 seconds between taps.

To end the call, tap MC button once.

Other scala rider models: Tap the CTRL button to open/close intercom call.